SHIFT LEVER ADJUSTMENT


  1. ADJUST SHIFT LEVER POSITION


    1. B007SLM

      Remove a clip, nut, and disconnect between the control shaft lever to transmission control cable assembly from the control shaft lever and transmission control cable bracket No. 1.

    2. B007P0RE06

      Turn the control shaft lever until stop to a clockwise direction, return the control shaft lever 2 notches to N position.

    3. B007P41

      Set the shift lever to N position while holding the shift lever lightly toward the R position side and install it.

      Torque:
      15 N*m  { 150 kgf*cm, 11 ft.*lbf }

    4. Inspect the operation condition and work.