PARK / NEUTRAL POSITION SWITCH INSTALLATION


  1. INSTALL PARK/NEUTRAL POSITION SWITCH ASSEMBLY

    Tech Tips

    Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch as the detent spring may become detached from the manual valve lever shaft.


    1. Install the park/neutral position switch to the manual valve shaft.

    2. A01DVE3E01

      Temporarily install the bolt.

    3. Install a new lock washer and the nut.

      Torque:
      7.0 N*m  { 71 kgf*cm, 62 in.*lbf }
    4. A01E2T6E01

      Push the control shaft rearward as much as possible.

    5. Return the control shaft lever 2 notches to the N position.

    6. A01DXXTE07

      Align the neutral basic line with the switch groove, and tighten the bolt.

      Torque:
      13 N*m  { 130 kgf*cm, 9 ft.*lbf }
    7. Using a screwdriver, bend the tabs of the lock washer.

  2. CONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  4. PERFORM INITIALIZATION


    1. Perform initialization Click here.

      Note

      Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

  5. INSPECT SHIFT LEVER POSITION


    1. Inspect the shift lever position Click here.

  6. ADJUST SHIFT LEVER POSITION


    1. Adjust the shift lever position Click here.

  7. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY

    A01DV2WE06

    1. Measure the resistance of the park/neutral switch when the shift lever is moved to each position

      Standard resistance
      Tester Connection Shift Lever Position Specified Condition
      4 (B) - 5 (L) P or N Below 1 Ω
      4 (B) - 5 (L) Not on P or N 10 kΩ or higher
      1 (RL) - 2 (RB) R Below 1 Ω
      1 (RL) - 2 (RB) Not on R 10 kΩ or higher
      2 (RB) - 7 (DL) D Below 1 Ω
      2 (RB) - 7 (DL) Not on D 10 kΩ or higher
      2 (RB) - 3 (2L) 2 Below 1 Ω
      2 (RB) - 3 (2L) Not on 2 10 kΩ or higher
      2 (RB) - 8 (LL) L Below 1 Ω
      2 (RB) - 8 (LL) Not on L 10 kΩ or higher