REAR AIRBAG SENSOR (for Double Cab) REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

  2. REMOVE REAR SEAT ASSEMBLY


    1. Remove the rear seat assembly Click here.

  3. REMOVE REAR DOOR SCUFF PLATE LH

    A01E0AJE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the front door scuff plate.

    2. Using a moulding remover, detach the 7 claws and 3 clips, and remove the front door scuff plate.

  4. REMOVE REAR DOOR OPENING TRIM LH

  5. REMOVE LOWER QUARTER TRIM PANEL LH

    A01E2HT

    1. Detach the claw and 3 clips and remove the lower quarter trim panel.

  6. REMOVE REAR AIRBAG SENSOR LH


    1. A01DXJX

      Remove the bolt and rear airbag sensor.

    2. Disconnect the connector.