CHARGING SYSTEM, Diagnostic DTC:P1602
| DTC Code | DTC Name |
|---|---|
| P1602 | Deterioration of Battery |
DESCRIPTION
The generator control ECU assembly monitors battery conditions. If the voltage drops below a certain value while the engine is running (not cranking), the generator control ECU assembly determines the battery is deteriorated and stores this DTC.
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
Warning Indicate |
Memory |
|---|---|---|---|---|---|
P1602 |
Deterioration of Battery |
Battery capacity is abnormally low for 10 seconds or more when the engine is running (not cranking). (1 trip detection logic) |
|
Charge warning light does not come on |
DTC stored |
WIRING DIAGRAM
Refer to System Diagram.
CAUTION / NOTICE / HINT
Inspect the fuses for circuits related to this system before performing the following procedure.
PROCEDURE
CHECK CHARGING SYSTEM
Check the charging system.
Result
Result
OK
NG
NG REPAIR OR REPLACE CHARGING SYSTEM
CHECK HARNESS AND CONNECTOR (POWER SOURCE CIRCUIT)
-
*a
Front view of wire harness connector
(to Generator Control ECU Assembly)
Disconnect the A52 generator control ECU assembly connector.
Measure the voltage according to the value(s) in the table below.
Standard Voltage
Tester Connection
Condition
Specified Condition
A52-5 (AM21) - Body ground
Always
11 to 14 V
Result
Result
OK
NG
NG REPAIR OR REPLACE HARNESS OR CONNECTOR
-