REAR DOOR SPEAKER INSTALLATION

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE

  1. INSTALL REAR NO. 2 SPEAKER ASSEMBLY (for 17 Speakers)

    1. B310848N01

      Align the speaker with the door position pins labeled A.

    2. Install the rear No. 2 speaker with the 2 screws.

      Note:

      Do not touch the cone of the speaker.

  2. INSTALL REAR SPEAKER ASSEMBLY

    1. B310847N01

      Temporarily install the speaker by attaching the 2 claws of the speaker to the door panel.

    2. Install the rear speaker with the 3 screws in the order shown in the illustration.

      Note:

      Do not touch the cone of the speaker.

    3. Connect the connector.

  3. INSTALL REAR DOOR INNER GLASS WEATHERSTRIP LH

    Click here

  4. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH

    Click here

  5. INSTALL REAR ARMREST ASSEMBLY LH

    Click here

  6. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG LH

    Click here

  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click hereClick hereClick here).