OCCUPANT DETECTION SENSOR INSPECTION

PROCEDURE


  1. INSPECT OCCUPANT DETECTION SENSOR (SEPARATE TYPE FRONT SEAT CUSHION PAD)


    1. Check the resistance.


      1. A001VEPC12
        *a

        Component without harness connected

        (Occupant Detection Sensor (Separate Type Front Seat Cushion Pad))

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 3 Front passenger side seat occupied Below 100 Ω
        1 - 3 Front passenger side seat not occupied 1 MΩ or higher

        If the result is not as specified, replace the occupant detection sensor (separate type front seat cushion pad).