ENGINE COOLANT TEMPERATURE SENSOR INSTALLATION

PROCEDURE

  1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

    1. Install a new gasket to the engine coolant temperature sensor.

    2. Using a 19 mm deep socket wrench, install the engine coolant temperature sensor to the cylinder head sub-assembly.

      19.6 N*m

      200 kgf*cm

      14 ft.*lbf

      Note:

      If a component has been dropped or subjected to a strong impact, replace it.

      Tip:

      Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.

      Click here

    3. Connect the engine coolant temperature sensor connector.

  2. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

    Click hereClick here

  3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  4. ADD ENGINE COOLANT

    Click here

  5. INSPECT FOR ENGINE COOLANT LEAK

    Click here

  6. INSTALL NO. 2 CYLINDER HEAD COVER

    Click hereClick here