DIFFERENTIAL SYSTEM


  1. CONSTRUCTION


    1. The electromagnetic control coupling is placed in front of the differential.

    2. A differential carrier and a differential retainer made of aluminum are used for weight reduction.

      A00YYQNC01
      *1 Rear Differential Retainer *2 Rear Differential Case
      *3 Rear Drive Shaft *4 Ring Gear
      *5 Pinion Gear *6 Side Gear
      *7 Rear Differential Carrier *8 Rear Drive Pinion
      *9 Electromagnetic Control Coupling Portion - -

  2. OPERATION


    1. Rear Differential Power Flow


      1. The illustration below shows the flow of power transmitted from the propeller shaft assembly:

        A00YYIBC01
        *1 Propeller Shaft *2 Front Housing
        *3 Main Clutch *4 Shaft
        *5 Drive Pinion *6 Ring Gear
        *7 Differential Case *8 Pinion Shaft
        *9 Pinion Gear *10 Side Gear
        *11 Rear Drive Shaft - -
        A00YYR0 Power Flow - -