ENGINE COOLANT TEMPERATURE SENSOR REMOVAL

PROCEDURE


  1. REMOVE CENTER NO. 4 ENGINE UNDER COVER

    Click here

  2. DRAIN ENGINE COOLANT (for Engine)

    Click here

  3. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here

  4. DISCONNECT ENGINE WIRE

    A01OA12

    1. Disconnect the 2 wire harness clamps and engine wire.

  5. REMOVE ENGINE COOLANT TEMPERATURE SENSOR


    1. A01ODAC

      Disconnect the engine coolant temperature sensor connector.

    2. A01ODJA

      Using a 19 mm ball joint lock nut wrench, remove the engine coolant temperature sensor from the water outlet sub-assembly.

    3. Remove the gasket from the engine coolant temperature sensor.