THERMOSTAT INSTALLATION

PROCEDURE

  1. INSTALL THERMOSTAT

    1. Install a new gasket to the thermostat.

    2. A156459C02

      *1

      Jiggle Valve

      Install the thermostat to the water inlet.

      Note:

      The jiggle valve must be set within 10° on either side of the position shown in the illustration.

  2. CONNECT WATER INLET

    1. Connect the water inlet with the 2 nuts.

      10 N*m

      102 kgf*cm

      7 ft.*lbf

  3. INSTALL GENERATOR ASSEMBLY

    Click here

  4. ADD ENGINE COOLANT

    Click here

  5. INSPECT FOR COOLANT LEAK

    Click here

  6. INSTALL NO. 1 ENGINE UNDER COVER

    Click here