SERVICE PLUG GRIP INSTALLATION

PROCEDURE


  1. INSTALL SERVICE PLUG GRIP

    CAUTION:

    Wear insulated gloves.

    Note


    • Before connecting the service plug, check that no parts and tools remain and that the high voltage terminals and connectors are connected securely.

    • Connect the auxiliary battery on the same day of installing the service plug grip to allow the battery cell voltage equalization function of the battery smart unit to operate.


    1. Wear insulated gloves and install the service plug grip in the order shown in the illustration.

      A005E0U

    2. Rotate the handle of the service plug grip 90° toward the battery and slide it in the direction shown by the arrow until a click sound is heard.

  2. INSTALL NO. 5 HYBRID BATTERY SHIELD PANEL


    1. A005C62

      Install the No. 5 hybrid battery shield panel with the 3 claws in the order shown in the illustration.

  3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. INSTALL UPPER CONSOLE PANEL

    Click here

  5. INSTALL DECK FLOOR BOX RH

    Click here

  6. INSTALL REAR DECK FLOOR BOX

    Click here

  7. INSTALL NO. 2 DECK BOARD

    Click here

  8. INSTALL NO. 1 DECK BOARD

    Click here

  9. INSTALL DECK BOARD ASSEMBLY

    Click here