RELAY ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT NO. 1 STARTER RELAY ASSEMBLY (ST NO. 1)


    1. B00280ZN01

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
      Battery voltage applied to terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the No. 1 starter relay assembly.

  2. INSPECT NO. 2 STARTER RELAY ASSEMBLY (ST NO. 2)


    1. A01SH31N28

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
      Battery voltage applied to terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the starter relay.

  3. INSPECT GLOW RELAY (GLOW)


    1. B00280ZN01

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
      Battery voltage applied to terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the glow relay.