CRANKSHAFT POSITION SENSOR INSTALLATION

PROCEDURE

1. INSTALL CRANKSHAFT POSITION SENSOR

   
   

   1. Apply a light coat of engine oil to the O-ring.

   2. Install the crankshaft position sensor with a new bolt.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      
      

      • When reusing the crankshaft position sensor, check the O-ring.

      • Make sure that the O-ring is not cracked or jammed when installing to the timing chain cover assembly.

      • Replace with a new part if it is dropped or if it receives a strong impact.

   3. Connect the crankshaft position sensor connector.