FRONT SEATBACK HEATER (for Power Seat) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


  1. REMOVE FRONT SEAT ASSEMBLY

    Click here

  2. REMOVE RECLINING POWER SEAT SWITCH KNOB


    1. A01E03GE02
      Text in Illustration
      *1 Protective Tape

      Apply protective tape around the front seat cushion shield.

    2. Using a screwdriver, detach the 2 claws and remove the reclining power seat switch knob.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    1. A01DXK4E02
      Text in Illustration
      *1 Protective Tape

      Apply protective tape around the front seat cushion shield.

    2. Using a screwdriver, detach the 4 claws and remove the slide and vertical power seat switch knob.

      Tech Tips

      Tape the screwdriver tip before use.

  4. REMOVE FRONT SEAT CUSHION SHIELD LH


    1. A01DXZM

      Remove the 2 screws.

    2. A01DXHX

      Remove the 3 screws.

    3. Detach the claw and guide.

    4. Remove the front seat cushion shield RH.

  5. REMOVE FRONT SEAT INNER CUSHION SHIELD LH


    1. A01DYHP

      Remove the screw.

    2. Detach the claw and guide.

    3. A01DYCZ

      Pull the front seat inner cushion shield RH to detach the claw and remove the front seat inner cushion shield RH.

  6. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH

    A01DXC2E01

    1. Disconnect the connector and detach the 3 clamps.

    2. A01DZ9C

      Roll up the front seat cushion cover LH.

    3. Remove the nut and front seat inner belt assembly.

    4. Remove the buckle cover.

  7. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY


    1. A01DYXZ

      Detach the 4 front seat airbag wire harness clamps.

    2. A01DXTF

      Disconnect the No. 1 seat wire connector and detach the wire harness clamp.

    3. A01DZD4

      Detach the front seatback heater assembly LH wire harness clamp.

    4. A01E12J

      Remove the 2 screws, 4 bolts and separate type front seatback assembly.

  8. REMOVE RECLINING ADJUSTER INSIDE COVER RH


    1. A01E2SQ

      Detach the guide and remove the reclining adjuster inside cover RH.

  9. REMOVE RECLINING ADJUSTER INSIDE COVER LH


    1. A01DVDD

      Detach the guide and remove the reclining adjuster inside cover LH.

  10. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    1. A01DWRF

      w/o Front Seat Side Airbag:

      Disconnect the No. 1 seat wire connector and detach the wire harness clamp.

    2. A01DZNG

      Remove the hog rings from the wires of the separate type front seatback cover, and then roll up the separate type front seatback cover.

    3. Pass the No. 1 seat wire through the hole of the separate type front seatback cover.

    4. A01E326

      for LHD, w/ Seat Heater System:

      Pass the front seatback heater assembly LH wire harness through the hole of the separate type front seatback cover.

    5. A01E1LC

      Remove the hog rings and detach the strap of the separate type front seatback cover, and then roll up the separate type front seatback cover and No. 1 seatback cloth.

    6. A01E1F3

      Pass the strap of the separate type front seatback cover through the holes of the separate type front seatback pad.

    7. A01DZB8

      w/ Front Seat Side Airbag:

      Remove the nut and detach the separate type front seatback cover bracket.

    8. Remove the hog rings and roll up the separate type front seatback cover.

      A01E06OE01
      Text in Illustration
      *A w/o Front Seat Side Airbag *B w/ Front Seat Side Airbag
      *a Front view of front seatback *b Rear view of front seatback
    9. A01E2KR

      Detach the 4 claws and remove the 2 front seat headrest supports and separate type front seatback cover from the separate type front seatback pad.

  11. REMOVE FRONT SEATBACK HEATER ASSEMBLY LH


    1. A01DW4W

      Cut off the tack pins which hold down the front seatback heater assembly LH, and then remove the front seatback heater assembly LH from the separate type front seatback cover.

      Note

      Be careful not to damage the separate type front seatback cover.