LUGGAGE DOOR LOCK CONTROL CABLE ASSEMBLY(for RHD) INSTALLATION

PROCEDURE

  1. INSTALL LUGGAGE DOOR LOCK CONTROL CABLE SUB-ASSEMBLY

    1. Engage the 5 clamps to install the luggage door lock control cable sub-assembly.

    2. Engage the 6 clamp to connect the luggage door lock control cable sub-assembly.

    3. Connect the luggage door lock control cable sub-assembly.

    4. B351008

      Engage the 2 claws as shown in the illustration.

    5. Return the floor carpet to the original position.

    6. Engage the clamp.

  2. INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY

    1. B351004C01

      *1

      Luggage Door Lock Control Cable Sub-assembly

      *2

      Fuel Lid Lock Control Cable Sub-assembly

      Connect the fuel lid lock control cable sub-assembly and luggage door lock control cable sub-assembly to the fuel lid lock open lever sub-assembly.

    2. B351002

      Engage the guide as shown in the illustration.

    3. Install the fuel lid lock open lever sub-assembly with the screw.

      5.5 N*m

      56 kgf*cm

      49 in.*lbf

  3. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH

    Click here

  4. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Click here

  5. INSTALL JACK ASSEMBLY

    Click here

  6. INSTALL LUGGAGE COMPARTMENT SIDE TRAY ASSEMBLY

    Click here

  7. INSTALL REAR FLOOR FINISH PLATE

    Click here

  8. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER RH

    Click hereClick here

  9. INSTALL LUGGAGE COMPARTMENT DOOR COVER

    Click hereClick here

  10. INSTALL REAR SEAT SIDE GARNISH RH

    Tip:

    Use the same procedure as for the LH side.

    Click hereClick hereClick here

  11. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY (for RH Side)

    Tip:

    Use the same procedure as for the LH side.

    Click hereClick hereClick here

  12. INSTALL CENTER PILLAR LOWER GARNISH RH

    Tip:

    Use the same procedure as for the LH side.

    Click hereClick hereClick here

  13. CONNECT FRONT SEAT OUTER BELT ASSEMBLY RH

    Tip:

    Use the same procedure as for the LH side.

    Click hereClick here

  14. INSTALL LAP BELT OUTER ANCHOR COVER (for RH Side)

    Tip:

    Use the same procedure as for the LH side.

    Click hereClick here

  15. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Click hereClick hereClick here

  16. INSTALL REAR DOOR SCUFF PLATE RH

    Tip:

    Use the same procedure as for the LH side.

    Click hereClick hereClick here

  17. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

    Click hereClick hereClick here

  18. INSTALL FRONT DOOR SCUFF PLATE RH

    Tip:

    Use the same procedure as for the LH side.

    Click hereClick hereClick here

  19. INSTALL REAR SEATBACK ASSEMBLY RH

    Click here

  20. INSTALL FRONT SEAT ASSEMBLY RH

    Tip:

    Use the same procedure as for the LH side.

    Click here