FRONT SEAT SIDE AIRBAG ASSEMBLY(for Sedan) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

  • Be sure to read Precaution thoroughly before servicing.

    Click here

  • Wear protective gloves. Sharp areas on the parts may injure your hands.

  • If the front seat airbag assembly was deployed, replace the front seat airbag assembly, front seatback frame sub-assembly, separate type front seatback cover and separate type front seatback pad with the necessary parts in accordance with the extent of the collision damage.

    Click here

Tip:

  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

PROCEDURE

  1. REMOVE FRONT SEAT ASSEMBLY

    Click here

  2. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER

    Click here

  3. REMOVE RECLINING ADJUSTER RELEASE HANDLE

    Click here

  4. REMOVE VERTICAL ADJUSTING HANDLE (w/ Vertical Adjuster)

    Click here

  5. REMOVE FRONT SEAT CUSHION SHIELD

    for Driver Side:Click here

    for Front Passenger Side:Click here

  6. REMOVE FRONT SEAT INNER CUSHION SHIELD

    for Driver Side:Click here

    for Front Passenger Side:Click here

  7. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD

    Click here

  8. REMOVE FRONT SEAT AIRBAG ASSEMBLY

    CAUTION:

    When storing the front seat airbag assembly, keep the airbag deployment side facing upward.

    1. B345297

      Disengage the 2 clamps.

    2. Remove the 2 nuts and front seat airbag assembly.

      CAUTION:

      • The nuts must not be reused.

      • Make sure that the front seatback frame sub-assembly is not deformed. If it is, replace it with a new one.