WATER PUMP INSTALLATION

PROCEDURE

1. INSTALL ENGINE WATER PUMP ASSEMBLY

   1. 

      *a	Protrusion

      Align the protrusion of a new gasket with the cutout in the timing chain cover sub-assembly and install the gasket in the groove of the timing chain cover sub-assembly.

      Tip:

      Be sure to clean the contact surfaces.

   2. 

      Install the engine water pump assembly with the 5 bolts.

      Bolt A

      25.5 N*m

      260 kgf*cm

      19 ft.*lbf

      Bolt B

      21 N*m

      214 kgf*cm

      15 ft.*lbf

      Bolt Length

      Item	Length
      Bolt A	35 mm (1.38 in.)
      Bolt B	25 mm (0.984 in.)

2. INSTALL GENERATOR ASSEMBLY (for 90A Type)

   Click here

3. INSTALL GENERATOR ASSEMBLY (for 100A Type)

   Click here

4. ADD ENGINE COOLANT

   Click here

5. INSPECT FOR COOLANT LEAK

   Click here