RADIO RECEIVER INSTALLATION

PROCEDURE

  1. INSTALL NO. 1 RADIO BRACKET

    1. Install the No. 1 radio bracket with the 3 screws.

  2. INSTALL NO. 2 RADIO BRACKET

    1. Install the No. 2 radio bracket with the 3 screws.

  3. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY (for Radio and Display Type)

    1. Connect each connector.

    2. Attach the 4 clips to install the radio and display receiver assembly with bracket.

    3. Install the 4 bolts.

      12 N*m

      122 kgf*cm

      9 ft.*lbf

  4. INSTALL RADIO RECEIVER ASSEMBLY (for Radio Receiver Type)

    1. Connect each connector.

    2. Attach the 4 clips to install the radio receiver assembly with bracket.

    3. Install the 4 bolts.

      12 N*m

      122 kgf*cm

      9 ft.*lbf

  5. INSTALL TELLTALE LIGHT ASSEMBLY

    Click here

  6. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  7. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  8. INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL

    Click here

  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click hereClick hereClick here