MULTI-MODE MANUAL TRANSAXLE SYSTEM

DTC Code DTC Name
HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

Tip:

  • The TCM of this system is connected to the CAN communication system. Therefore, before starting troubleshooting, be sure to check that there is no trouble in the CAN communication system.

  • *: Use the GTS.

PROCEDURE

  1. VEHICLE BROUGHT TO WORKSHOP

    Result

    Proceed to

    NEXT
    NEXT

  2. CUSTOMER PROBLEM ANALYSIS

    Result

    Proceed to

    NEXT
    NEXT

  3. CONNECT GTS TO DLC3*

    Tip:

    If the display indicates a communication fault in the tool, inspect the DLC3.

    Result

    Proceed to

    NEXT
    NEXT

  4. CHECK CAN COMMUNICATION SYSTEM*

    1. Check for CAN communication system DTCs.

      Click hereClick hereClick hereClick here

      Result

      Result

      Proceed to

      CAN system DTCs are not output

      A

      CAN system DTCs are output

      B
      Tip:

      The TCM of this system is connected to the CAN communication system. Therefore, before starting troubleshooting, check that there is no trouble in the CAN communication system.

      Click here

    B

    PROCEED TO CAN COMMUNICATION SYSTEM

    Click here

    A

  5. CHECK DTC AND FREEZE FRAME DATA*

    Note:

    Record or print DTCs and freeze frame data, if necessary.

    Tip:

    Refer to DTC Check/Clear.

    Click here

    Result

    Proceed to

    NEXT
    NEXT

  6. CLEAR DTC AND FREEZE FRAME DATA*

    Tip:

    Refer to DTC Check/Clear.

    Click here

    Result

    Proceed to

    NEXT
    NEXT

  7. VISUAL INSPECTION

    Result

    Proceed to

    NEXT
    NEXT

  8. PROBLEM SYMPTOM CONFIRMATION

    Result

    Result

    Proceed to

    Symptom does not occur

    A

    Symptom occurs

    B
    B

    DTC CHECK*Click here

    A

  9. SYMPTOM SIMULATION

    Tip:

    Refer to the relevant pages.

    Click here

    Result

    Proceed to

    NEXT
    NEXT

  10. DTC CHECK*

    Tip:

    Refer to DTC Check/Clear.

    Click here

    Result

    Result

    Proceed to

    DTCs are output

    A

    DTCs are not output

    B
    B

    PROBLEM SYMPTOMS TABLEClick here

    A

  11. DTC CHART

    Tip:

    Refer to Diagnostic Trouble Code Chart.

    Click hereClick here

    Result

    Proceed to

    NEXT
    NEXT

  12. CIRCUIT INSPECTION

    Result

    Proceed to

    NEXT
    NEXT

  13. IDENTIFICATION OF PROBLEM

    Result

    Proceed to

    NEXT
    NEXT

  14. ADJUSTMENT, REPAIR OR REPLACEMENT

    Result

    Proceed to

    NEXT
    NEXT

  15. CONFIRMATION TEST

    Result

    Proceed to

    NEXT
    NEXT

    END

  16. PROBLEM SYMPTOMS TABLE

    Tip:

    Refer to Problem Symptoms Table.

    Click hereClick hereClick here

    Result

    Proceed to

    NEXT
    NEXT

  17. PART INSPECTION

    Result

    Proceed to

    NEXT
    NEXT

    ADJUSTMENT, REPAIR OR REPLACEMENTClick here