MONOLITHIC CONVERTER(w/ Glow Plug Controller) COMPONENTS
ILLUSTRATION
*1 |
DIFFERENTIAL PRESSURE SENSOR ASSEMBLY |
*2 |
NO. 2 WIRING HARNESS HEAT INSULATOR |
*3 |
NO. 1 VACUUM TRANSMITTING HOSE ASSEMBLY |
*4 |
NO. 2 VACUUM TRANSMITTING HOSE ASSEMBLY |
 |
N*m (kgf*cm, ft.*lbf): Specified torque |
- |
- |
ILLUSTRATION
*1 |
EXHAUST GAS TEMPERATURE SENSOR |
*2 |
WIRING HARNESS CLAMP BRACKET |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
* |
For use with union nut wrench |
ILLUSTRATION
*A |
for LHD |
*B |
for RHD |
*1 |
NO. 2 HOSE TO HOSE TUBE |
*2 |
CHECK VALVE TO CONNECTOR TUBE HOSE |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
- |
- |
ILLUSTRATION
*1 |
AIR CLEANER CAP SUB-ASSEMBLY |
*2 |
AIR CLEANER CASE SUB-ASSEMBLY |
*3 |
BATTERY |
*4 |
NO. 1 AIR TUBE |
*5 |
OUTLET HEATER WATER HOSE A |
*6 |
AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY |
*7 |
BATTERY CLAMP SUB-ASSEMBLY |
*8 |
BATTERY CLAMP BOLT |
*9 |
BATTERY TRAY |
- |
- |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
- |
- |
ILLUSTRATION
*1 |
SENSOR BRACKET |
*2 |
NO. 1 TURBO INSULATOR |
*3 |
NO. 5 MANIFOLD SUPPORT BRACKET |
*4 |
NO. 2 VACUUM PIPE |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
* |
For use with union nut wrench |
ILLUSTRATION
*A |
Type A |
*B |
Type B |
*1 |
FRONT NO. 1 FLOOR HEAT INSULATOR |
*2 |
FRONT EXHAUST PIPE ASSEMBLY |
*3 |
FRONT CENTER FLOOR BRACE SUB-ASSEMBLY |
*4 |
EXHAUST PIPE SUPPORT |
*5 |
COMPRESSION SPRING |
*6 |
GASKET |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
● |
Non-reusable part |
ILLUSTRATION
*1 |
NO. 4 MANIFOLD SUPPORT BRACKET |
*2 |
DRIVE SHAFT HEAT INSULATOR SUB-ASSEMBLY |
*3 |
NO. 1 MANIFOLD SUPPORT BRACKET |
*4 |
OUTLET TURBINE ELBOW GASKET |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
* |
For use with offset wrench and hexagon socket wrench |
● |
Non-reusable part |
- |
- |
ILLUSTRATION
*1 |
NO. 1 VACUUM PIPE |
*2 |
NO. 2 EXHAUST GAS TEMPERATURE SENSOR |
*3 |
NO. 2 EXHAUST MANIFOLD |
- |
- |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
* |
For use with union nut wrench |