HOOD ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT HOOD SUB-ASSEMBLY


    1. Check that the clearance measurements of areas *a through *e are within each standard range.

      A005CCXE01
      Standard Clearance
      Area Measurement Area Measurement
      *a 1.8 to 5.8 mm (0.0709 to 0.228 in.) *b 2.0 to 6.0 mm (0.0787 to 0.236 in.)
      *c -2.0 to 2.0 mm (-0.0787 to 0.0787 in.) *d 2.5 to 5.5 mm (0.0984 to 0.217 in.)
      *e -1.5 to 1.5 mm (-0.0591 to 0.0591in.) - -