BACK DOOR LOCK REASSEMBLY


  1. INSTALL DOOR CONTROL MOTOR


    1. Apply MP grease to the sliding parts of the door control motor.

    2. B007V6N

      Using a T25 "TORX" socket wrench, install the door control motor with the 3 "TORX" screws.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

      Tech Tips

      A new door control motor uses self-tapping screws to thread new installation holes when the self-tapping screws are inserted.

  2. INSTALL BACK DOOR CLOSER MOTOR ASSEMBLY


    1. B007ORC

      Install the back door control motor assembly with the 3 bolts.

      Torque:
      7.8 N*m  { 80 kgf*cm, 69 in.*lbf }

    2. Connect the connectors and attach the clamp.

  3. INSTALL BACK DOOR LOCK ASSEMBLY


    1. Apply MP grease to the sliding parts of the back door lock assembly.

    2. B007SDA

      Install the back door lock assembly with the 4 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

  4. INSTALL PIN HOLD CLIP


    1. B007Q8I

      Install the pin hold clip.

  5. INSTALL BACK DOOR CLOSER COVER


    1. B007TZR

      Attach the 3 claws and 3 clips to install the back door closer cover.

  6. INSTALL BACK DOOR REMOTE CONTROL ASSEMBLY


    1. Install the back door remote control assembly with the 3 screws.

    2. Connect the wire and link.

    3. Attach the 2 clamps.

      B007PHN

  7. INSTALL BACK DOOR INSIDE HANDLE ASSEMBLY


    1. Install the back door inside handle assembly with the 3 screws.

    2. Connect the link.

      B007UX6E02
      Text in Illustration
      *A w/o Power Door Lock *B w/ Power Door Lock

  8. INSTALL BACK DOOR TRIM BOARD


    1. B007PPB

      Attach the 18 clips to install the back door trim board.

    2. Install the 2 screws.

  9. INSTALL BACK DOOR INSIDE HANDLE ASSEMBLY


    1. B007PO3

      Install the back door inside handle assembly with the screw.