BRAKE MASTER CYLINDER(for LHD with Vacuum Brake Booster) DISASSEMBLY

PROCEDURE


  1. REMOVE BRAKE MASTER CYLINDER STRAIGHT PIN


    1. Secure the brake master cylinder sub-assembly in a vise.

      Note

      Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.

    2. B006CGN

      Using a 5 mm pin punch and a hammer, tap out the brake master cylinder straight pin from the brake master cylinder sub-assembly.

      Note

      Do not drop the brake master cylinder reservoir assembly.

  2. REMOVE BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY


    1. Remove the brake master cylinder reservoir assembly from the brake master cylinder assembly.

  3. REMOVE MASTER CYLINDER RESERVOIR GROMMET


    1. B006EA0

      Remove the 2 master cylinder reservoir grommets from the brake master cylinder assembly.

    2. Remove the brake master cylinder assembly from the vise.

  4. REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY

  5. REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER