FUEL PRESSURE SENSOR REMOVAL

PROCEDURE

  1. PRECAUTION

    Note:

    • After the engine has stopped, wait at least 1 minute before releasing the high pressure lines.

    • When working on the fuel circuit, protect the generator assembly against contamination. Cover the generator assembly with suitable materials. Failure to comply with this procedure may result in a generator assembly malfunction.

    • A316354N01

      After disconnecting the pressure line, it is absolutely essential to seal the injector assemblies and the common rail assembly with SST.

      SST

      PZ4TB-04941-79

  2. REMOVE COMMON RAIL ASSEMBLY

    Click here

  3. REMOVE FUEL PRESSURE SENSOR

    1. A316318

      Remove the fuel pressure sensor.

    2. Cover the connector of the fuel pressure sensor and remove any thread-locking sealant from the threads with a suitable cleaning agent. Clean the threads and sealing surface on the common rail assembly and seal with SST.