OIL PUMP REASSEMBLY

PROCEDURE


  1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE (for Exhaust Side of Bank 2)

    A004HVEE04

    1. Install the back-up ring to the camshaft timing oil control valve.

      Text in Illustration
      *1 O-ring
      *2 Back-up Ring

    2. Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve.

    3. A004K04

      Install the camshaft timing oil control valve with the 2 bolts.

      Torque:
      6.4 N*m  { 65 kgf*cm, 57 in.*lbf }

      Note


      • If a component has been dropped or subjected to a strong impact, replace it.

      • Make sure that the O-ring is not damaged or does not jump out of position during installation.

  2. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE (for Intake Side of Bank 2)

    A004HVEE04

    1. Install the back-up ring to the camshaft timing oil control valve.

      Text in Illustration
      *1 O-ring
      *2 Back-up Ring

    2. Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve.

    3. A004JGM

      Install the camshaft timing oil control valve with the 2 bolts.

      Torque:
      6.4 N*m  { 65 kgf*cm, 57 in.*lbf }

      Note


      • If a component has been dropped or subjected to a strong impact, replace it.

      • Make sure that the O-ring is not damaged or does not jump out of position during installation.

  3. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE (for Exhaust Side of Bank 1)

    A004HVEE04

    1. Install the back-up ring to the camshaft timing oil control valve.

      Text in Illustration
      *1 O-ring
      *2 Back-up Ring

    2. Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve.

    3. A004IPV

      Install the camshaft timing oil control valve with the 2 bolts.

      Torque:
      6.4 N*m  { 65 kgf*cm, 57 in.*lbf }

      Note


      • If a component has been dropped or subjected to a strong impact, replace it.

      • Make sure that the O-ring is not damaged or does not jump out of position during installation.

  4. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE (for Intake Side of Bank 1)

    A004HVEE04

    1. Install the back-up ring to the camshaft timing oil control valve.

      Text in Illustration
      *1 O-ring
      *2 Back-up Ring

    2. Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve.

    3. A004ITD

      Install the camshaft timing oil control valve with the 2 bolts.

      Torque:
      6.4 N*m  { 65 kgf*cm, 57 in.*lbf }

      Note


      • If a component has been dropped or subjected to a strong impact, replace it.

      • Make sure that the O-ring is not damaged or does not jump out of position during installation.

  5. INSTALL VVT SENSOR (for Exhaust Side of Bank 2)


    1. Apply a light coat of engine oil to the new O-ring of the VVT sensor.

    2. A004JZT

      Install the VVT sensor with the bolt.

      Torque:
      6.4 N*m  { 65 kgf*cm, 57 in.*lbf }

  6. INSTALL VVT SENSOR (for Intake Side of Bank 2)


    1. Apply a light coat of engine oil to the new O-ring of the VVT sensor.

    2. A004HCI

      Install the VVT sensor with the bolt.

      Torque:
      6.4 N*m  { 65 kgf*cm, 57 in.*lbf }

  7. INSTALL VVT SENSOR (for Exhaust Side of Bank 1)


    1. Apply a light coat of engine oil to the new O-ring of the VVT sensor.

    2. A004JTQ

      Install the VVT sensor with the bolt.

      Torque:
      6.4 N*m  { 65 kgf*cm, 57 in.*lbf }

  8. INSTALL VVT SENSOR (for Intake Side of Bank 1)


    1. Apply a light coat of engine oil to the new O-ring of the VVT sensor.

    2. A004IYS

      Install the VVT sensor with the bolt.

      Torque:
      6.4 N*m  { 65 kgf*cm, 57 in.*lbf }

  9. INSTALL ENGINE OIL TEMPERATURE SENSOR


    1. Install a new gasket to the engine oil temperature sensor.

    2. A004H5RE02
      Text in Illustration
      *1 19 mm Deep Socket Wrench

      Using a 19 mm deep socket wrench, install the engine oil temperature sensor to the cylinder head sub-assembly.

      Torque:
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }

  10. INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY


    1. A004HXFE43
      Text in Illustration
      *1 Adhesive

      Apply adhesive to 2 or 3 threads of the engine oil pressure switch assembly.

      Adhesive
      Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent
    2. A004INIE02
      Text in Illustration
      *1 24 mm Deep Socket Wrench

      Using a 24 mm deep socket wrench, install the engine oil pressure switch assembly.

      Torque:
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }

      Note

      Do not start the engine for at least 1 hour after installation.

  11. INSTALL OIL FILTER UNION

    Click here

  12. INSTALL OIL FILTER SUB-ASSEMBLY

    Click here