PROCEDURE
REMOVE FRONT DOOR SCUFF PLATE RH
Tech Tips
Use the same procedure as for the LH side Click here.
DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH
Tech Tips
Disconnect the front door opening trim weatherstrip to the extent that allows the removal of the luggage compartment trim cover RH.
REMOVE FRONT SEAT ASSEMBLY
REMOVE SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY RH
Tech Tips
Use the same procedure as for the LH side Click here.
REMOVE LUGGAGE COMPARTMENT FLOOR MAT
REMOVE REAR FLOOR FINISH PLATE
REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER RH
Disengage the 5 clips and remove the luggage compartment inner trim cover RH.
REMOVE LUGGAGE COMPARTMENT TRIM COVER RH
Tech Tips
Use the same procedure as for the LH side Click here.
REMOVE NO. 2 PACKAGE TRAY TRIM SPACER
Using a clip remover, remove the 3 clips and the No. 2 package tray trim spacer.
REMOVE HANDLE COVER
| *1 | Protective Tape |
Using a screwdriver with its tip wrapped in protective tape, disengage the claw.
Remove the screw.
Remove the handle cover as shown in the illustration.
REMOVE FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY
Peel back the floor carpet.
Remove the 2 nuts and the fuel lid lock open lever sub-assembly.
Disconnect the fuel lid lock control cable sub-assembly.
REMOVE FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY
Remove the fuel filler opening lid lock retainer as indicated by the arrows in the order shown in the illustration.
Using a screwdriver with its tip wrapped in protective tape, disengage the 7 clamps and remove the fuel lid lock control cable sub-assembly.
| *1 | Fuel Lid Lock Control Cable Sub-Assembly | - | - |