DRIVE SHAFT / PROPELLER SHAFT SERVICE DATA

Table 1. Front Drive Shaft Assembly
Standard drive shaft length	LH Side	570.9 mm (1.87 ft.)
Standard drive shaft length	RH Side	914.4 mm (3.00 ft.)
Standard distance	Front drive shaft dust cover RH	110.0 to 111.0 mm (4.331 to 4.370 in.)
	Front drive shaft damper LH	212.5 to 216.5 mm (8.367 to 8.523 in.)
	Front drive shaft damper RH	199.0 to 203.0 mm (7.835 to 7.992 in.)
Standard grease capacity	Outboard joint	205.0 to 215.0 g (7.3 to 7.5 oz)
Standard grease capacity	Inboard joint	175.0 to 185.0 g (6.2 to 6.5 oz)

Table 2. Rear Drive Shaft Assembly
Standard drive shaft length		598.1 to 608.1 cm (1.97 to 1.99 ft.)
Standard drive shaft boot clamp clearance	Rear drive shaft outboard joint boot clamp	1.2 mm (0.0472 in.) or less
Standard grease capacity	Outboard joint	55.0 to 65.0 g (2.0 to 2.2 oz)
Standard grease capacity	Inboard joint	132.0 to 142.0 g (4.7 to 5.0 oz)