REAR SPOILER REASSEMBLY

PROCEDURE

  1. INSTALL CENTER STOP LIGHT ASSEMBLY

    Click here

  2. INSTALL CENTER STOP LIGHT CORD ASSEMBLY

    Click here

  3. INSTALL NO. 1 REAR SPOILER PROTECTOR

    Tip:

    When installing the No. 1 rear spoiler protector, heat the rear spoiler using a heat light.

    Standard

    Item

    Temperature

    Rear Spoiler

    20 to 30°C (68 to 86°F)
    Note:

    Do not heat the rear spoiler excessively.

    1. Clean the rear spoiler surface.

      1. Using a heat light, heat the rear spoiler surface.

      2. Remove the double-sided tape from the rear spoiler.

      3. Wipe off any tape adhesive residue with cleaner.

    2. B481178C01

      *a

      Mark-off Line

      *b

      Cutout

      *c

      Permitted Application Area

      Install a new No. 1 rear spoiler protector.

      1. Using a heat light, heat the rear spoiler.

      2. Remove the peeling paper from the face of the No. 1 rear spoiler protector.

        Tip:

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Align the No. 1 rear spoiler protector with the mark-off line of the rear spoiler, and then install it.

        Tip:

        Press the No. 1 rear spoiler protector firmly to install it.