MANUAL HEADLIGHT BEAM LEVEL CONTROL SYSTEM

DTC Code DTC Name
HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

Tip:

Use the following procedure to troubleshoot the manual headlight beam level control system.

PROCEDURE

  1. VEHICLE BROUGHT TO WORKSHOP

    Result

    Proceed to

    NEXT
    NEXT

  2. CUSTOMER PROBLEM ANALYSIS AND SYMPTOM CHECK

    Result

    Proceed to

    NEXT
    NEXT

  3. INSPECT BATTERY VOLTAGE

    1. Measure the battery voltage.

      Standard Voltage

      11 to 14 V

      If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.

    Result

    Proceed to

    NEXT
    NEXT

  4. PROBLEM SYMPTOMS TABLE

    1. Refer to Problem Symptoms Table.

      Click here

    Result

    Proceed to

    NEXT
    NEXT

  5. ADJUST, REPAIR OR REPLACE

    Result

    Proceed to

    NEXT
    NEXT

  6. CONFIRMATION TEST

    Result

    Proceed to

    NEXT
    NEXT

    END