HEATED OXYGEN SENSOR(for Sensor 1) REMOVAL

PROCEDURE

  1. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  2. REMOVE INLET NO. 1 AIR CLEANER

    Click hereClick here

  3. REMOVE HEATED OXYGEN SENSOR (Sensor 1)

    1. A321722

      Disconnect the heated oxygen sensor (sensor 1) connector.

    2. Disengage the 2 wire harness clamps.

    3. A322418N01

      Using SST, remove the heated oxygen sensor (sensor 1) from the exhaust manifold.

      09224-00010

      Note:

      If the heated oxygen sensor (sensor 1) has been struck or dropped, replace it.