NAME PLATE INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

When installing new name plates or emblems, heat the vehicle body and name plates using a heat light.

Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Name Plate or Emblem 20 to 30°C (68 to 86°F)

Note

Do not heat the vehicle body, name plates or emblems excessively.

PROCEDURE


  1. INSTALL NO. 1 BACK DOOR EMBLEM


    1. Engage the pin and 3 claws to install the No. 1 back door emblem.

    2. Install the back door outside garnish sub-assembly Click here.

  2. INSTALL NO. 2 BACK DOOR NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove any double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Clean the No. 2 back door name plate (if reusing the No. 2 back door name plate).


      1. Using a heat light, heat the No. 2 back door name plate.

      2. Remove the double-sided tape from the No. 2 back door name plate.

      3. Wipe off any tape adhesive residue with cleaner.

      4. Apply new double-sided tape to the No. 2 back door name plate.

    3. Install the No. 2 back door name plate.


      1. Using a heat light, heat the vehicle body and the No. 2 back door name plate.

      2. Remove the release paper from the No. 2 back door name plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 2 back door name plate as shown in the illustration.

        Type A:

        A005E0OE03
        Text in Illustration
        *a Profile of Back Door Panel *b Edge of Curved Surface
        Reference Measurement
        Area Measurement
        A 168.7 mm (6.64 in.)
        B 17.2 mm (0.677 in.)
        C 95.1 mm (3.74 in.)
        D 23.0 mm (0.906 in.)

        Type B:

        A005CK0E02
        Text in Illustration
        *a Profile of Back Door Panel *b Edge of Curved Surface
        Reference Measurement
        Area Measurement
        A 119.9 mm (4.72 in.)
        B 20.5 mm (0.807 in.)
        C 145.6 mm (5.73 in.)
        D 18.5 mm (0.728 in.)

  3. INSTALL NO. 1 BACK DOOR NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove any double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Clean the No. 1 back door name plate (if reusing the No. 1 back door name plate).


      1. Using a heat light, heat the No. 1 back door name plate.

      2. Remove the double-sided tape from the No. 1 back door name plate.

      3. Wipe off any tape adhesive residue with cleaner.

      4. Apply new double-sided tape to the No. 1 back door name plate.

    3. Install the No. 1 back door name plate.


      1. Using a heat light, heat the vehicle body and the No. 1 back door name plate.

      2. Remove the release paper from the No. 1 back door name plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 1 back door name plate as shown in the illustration.

        for Hybrid Plate (Type A):

        A005CSME02
        Text in Illustration
        *a Profile of Back Door Panel *b Edge of Curved Surface
        Reference Measurement
        Area Measurement
        A 96.2 mm (3.79 in.)
        B 114.5 mm (4.51 in.)
        C 132.2 mm (5.20 in.)
        D 58.7 mm (2.31 in.)

        for TOYOTA Plate (Type B):

        A005BISE02
        Text in Illustration
        *a Profile of Back Door Panel *b Edge of Curved Surface
        Reference Measurement
        Area Measurement
        A 154.8 mm (6.09 in.)
        B 68.0 mm (2.68 in.)
        C 107.2 mm (4.22 in.)
        D 51.3 mm (2.02 in.)

        for Hybrid Plate (Type B):

        A005BN9E02
        Text in Illustration
        *a Profile of Back Door Panel *b Edge of Curved Surface
        Reference Measurement
        Area Measurement
        A 242.4 mm (9.54 in.)
        B 125.9 mm (4.96 in.)
        C 259.9 mm (10.2 in.)
        D 55.4 mm (2.18 in.)

  4. INSTALL SIDE PANEL EMBLEM


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove any double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Clean the side panel emblem (if reusing the side panel emblem).


      1. Using a heat light, heat the side panel emblem.

      2. Remove the double-sided tape from the side panel emblem.

      3. Wipe off any tape adhesive residue with cleaner.

      4. Apply new double-sided tape to the side panel emblem.

    3. Install the side panel emblem.


      1. Using a heat light, heat the vehicle body and the side panel emblem.

      2. Remove the release paper from the side panel emblem.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the side panel emblem as shown in the illustration.

        A005BK3E02
        Text in Illustration
        *1 Location Pin - -

        Tech Tips

        Use the same procedure for the RH side and LH side.