ROOF HEADLINING(w/ Rear No. 2 Seat) DISASSEMBLY

PROCEDURE


  1. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY

    Click here

  2. REMOVE WASHER HOSE ASSEMBLY


    1. Remove the washer hose assembly.

      B005M6BC02
      *A for Standard Roof *B for Sliding Roof

  3. REMOVE VANITY LIGHT ASSEMBLY

    Click here

  4. REMOVE TELEPHONE MICROPHONE ASSEMBLY

    Click here

  5. REMOVE NO. 1 ROOF WIRE


    1. for LHD:


      1. Remove the adhesive tape from the roof headlining assembly.

        B005PYRC02
        *A for Standard Roof *B for Sliding Roof
        B007ZL6 Adhesive Tape - -

    2. for RHD:


      1. Remove the adhesive tape from the roof headlining assembly.

        B005OAOC02
        *A for Standard Roof *B for Sliding Roof
        B007ZL6 Adhesive Tape - -

    3. Turn the 2 visor connectors counterclockwise approximately 90° and remove them from the roof headlining assembly.

      B005MSNC01
      *A for Standard Roof *B for Sliding Roof
      *a 90° - -
      B007Z37 Rotation Direction - -

    4. Disengage each clamp and remove the No. 1 roof wire from the roof headlining assembly.