NAVIGATION ANTENNA INSTALLATION

PROCEDURE

1. INSTALL NAVIGATION ANTENNA ASSEMBLY

   1. Install the navigation antenna with the 2 screws.

   2. Attach the 3 clamps.

2. INSTALL DEFROSTER NOZZLE ASSEMBLY

   Click here

3. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT

   Click here

4. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT

   Click here

5. INSTALL NO. 2 HEATER TO REGISTER DUCT

   Click here

6. INSTALL NO. 1 HEATER TO REGISTER DUCT

   Click here

7. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

   1. Install the instrument panel safety pad sub-assembly (Click here).

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

9. CHECK SRS WARNING LIGHT

   1. Check the SRS warning light (Click here).