COMPRESSOR INSPECTION

PROCEDURE

  1. INSPECT MAGNET CLUTCH ASSEMBLY

    E204846C01

    *1

    Magnet Clutch Rotor

    *2

    Magnet Clutch Hub

    *3

    Battery

    *a

    Component without harness connected

    (Magnet Clutch Assembly)

    1. Check the magnet clutch operation.

      1. Confirm that the magnet clutch hub and magnet clutch rotor lock when the battery positive (+) lead is connected to terminal 3 of the magnet clutch and the negative (-) lead is connected to the ground wire.

        If the operation is not as specified, replace the magnet clutch assembly.

    2. Measure the resistance between terminals 1 and 2.

      Standard resistance

      65 to 125 Ω at 20°C (68°F)

      If the resistance is not as specified, replace the cooler compressor assembly.