KNEE AIRBAG ASSEMBLY(for Front Passenger Side) INSTALLATION

PROCEDURE

1. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY

   1. 

      Connect the connector.

      Note:

      When handling the airbag connector, take care not to damage the airbag wire harness.

   2. Attach the 6 claws to install the instrument panel airbag.

   3. Install the 3 bolts.

      10 N*m

      102 kgf*cm

      7 ft.*lbf

2. INSTALL LOWER INSTRUMENT COVER LH

   Click here

3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

4. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

   Click here

5. INSTALL COWL SIDE TRIM BOARD RH

   Click here

6. INSTALL DOOR SCUFF PLATE ASSEMBLY RH

   Click here

7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

8. CHECK SRS WARNING LIGHT

   1. Check the SRS warning light (Click here).