STARTER (for 2.2 kW Type) DISASSEMBLY


  1. REMOVE STARTER YOKE ASSEMBLY


    1. B007UFME01

      Remove the nut and disconnect the lead wire from terminal C.

    2. B007PDQE01

      Remove the 2 bolts.

    3. Pull out the starter yoke with the armature.

    4. Remove the O-ring from the starter yoke assembly.

  2. REMOVE MAGNET STARTER SWITCH ASSEMBLY


    1. B007OLC

      Remove the 2 screws and magnet starter switch.

    2. Remove the return spring, pinion gear, idler gear, clutch roller, retainer and starter clutch from the starter housing.

      B007RCME02
    3. B007SO2

      Using a magnetic finger, remove the steel ball from the clutch shaft hole.

  3. REMOVE STARTER BRUSH HOLDER ASSEMBLY

    B007TXTE03

    1. Disconnect the 4 starter yoke brushes from the brush holder.


      1. Using a screwdriver, pull back the spring.

      2. Disconnect the brush from the brush holder.

    2. Remove the brush holder assembly from the starter yoke assembly.

  4. REMOVE STARTER ARMATURE ASSEMBLY

    B007W6DE02

    1. Using a plastic-faced hammer, tap the frame end to remove the starter armature assembly from the starter yoke assembly.