BACK DOOR LOCK DISASSEMBLY


  1. REMOVE BACK DOOR INSIDE HANDLE ASSEMBLY


    1. B007PO3

      Remove the screw and the back door inside handle assembly.

  2. REMOVE BACK DOOR TRIM BOARD


    1. B007PPB

      Remove the 2 screws.

    2. Using a clip remover, remove the 18 clips and the back door trim board.

  3. REMOVE BACK DOOR INSIDE HANDLE ASSEMBLY


    1. B007PO3

      Remove the screw and the back door inside handle assembly.

  4. REMOVE BACK DOOR REMOTE CONTROL ASSEMBLY


    1. Disconnect the wire and link.

    2. Detach the 2 clamps.

    3. Remove the 3 screws and the back door remote control assembly.

      B007OWX

  5. REMOVE BACK DOOR CLOSER COVER


    1. B007TZR

      Detach the 3 clips and 3 claws and remove the back closer cover.

  6. REMOVE PIN HOLD CLIP


    1. B007OBN

      Remove the pin hold clip.

  7. REMOVE BACK DOOR LOCK ASSEMBLY


    1. B007SDA

      Remove the 4 bolts and the back door lock assembly.

  8. REMOVE BACK DOOR CLOSER MOTOR ASSEMBLY


    1. B007ORC

      Disconnect the connector and detach the clamp.

    2. Remove the 3 bolts and back door closer motor assembly.

  9. REMOVE DOOR CONTROL MOTOR


    1. B007V6N

      Using a T25 "TORX" driver, remove the 3 "TORX" screws and door control motor.