REAR SUSPENSION SYSTEM


  1. CONSTRUCTION


    1. The rear trailing arm assembly, upper control arm assembly and No. 2 rear suspension arm assembly use stamped high-strength sheet steel to achieve weight reduction and high rigidity.

    2. The rear trailing arm assembly uses a bush with an outer tube in order to counter the longitudinal force effectively and achieve excellent ride comfort.

    3. The upper control arm assembly, No. 1 rear suspension arm assembly and No. 2 rear suspension arm assembly use bushes with outer tubes on their suspension member sides and ball bushes on their axle sides, to ensure a high level of support rigidity.

      A01RXUJC01
      *a Cross Section of Rear Trailing Arm Assembly Installation Area *b Suspension Member Side
      *c Axle Side *d Cross Section of No. 1 Rear Suspension Arm Assembly Installation Area
      *e Cross Section of No. 2 Rear Suspension Arm Assembly Installation Area *f Cross Section of Rear Upper Control Arm Assembly Installation Area