POWER DOOR LOCK CONTROL SYSTEM


  1. FUNCTION


    1. The power door lock control system has the following functions:

      Function Outline
      Manual Lock and Unlock This function can lock or unlock all doors by operation of the door control switch.
      Key-linked Lock and Unlock This function, which is linked with the key cylinder, can lock or unlock all the doors when a lock or unlock operation is performed.
      Manual Unlock Prohibition When the door lock operation is conducted by the entry function*1 or wireless door lock control function, this function prevents the doors from being unlocked by unlock operation via the door control switch.
      Key Confinement Prevention

      • When the electrical key transmitter sub-assembly is inserted in the interior actuation area and the door lock operation is performed while the driver door is open, all the doors will be unlocked.*1

      • When the key is inserted in the ignition key cylinder and the door lock operation is performed while the driver door is open, all the doors will be unlocked.*2
      2-step Unlock*3 When the mechanical key is inserted into the door key cylinder and is turned once, the driver door is unlocked. Then, the mechanical key is turned again, the rest of the doors are unlocked. In addition, when the unlock button of the electrical key transmitter sub-assembly*1 or door control transmitter sub-assembly*2 is pressed once, the driver door is unlocked. Then, the button is pressed again, the rest of the doors are unlocked.
      Speed Sensitive Automatic Door Lock*4

      When the conditions listed below are met, this function causes all the doors to be automatically locked:


      • The vehicle speed is above approx. 20 km/h (13 mph).

      • All the doors are closed.

      • Any door is unlocked.
      Shift-linked Automatic Door Lock*4

      When the conditions listed below are met, this function causes all the doors to be automatically locked:


      • The ignition switch is changed from ACC or off to ON.

      • All the doors are closed.

      • The shift lever is moved out of the P position.

      • Any of the doors are in an unlocked state.
      Shift-linked Automatic Door Unlock*4 When the ignition switch is ON and the shift lever is moved to P position from a position other than P, all of the doors will be automatically unlocked.
      Driver Door Opening-linked Automatic Door Unlock*4 When the electrical key transmitter sub-assembly*1 or door control transmitter sub-assembly*2 is inserted in the interior actuation area and the door lock operation is performed while the driver door is open, all the doors will be unlocked.
      Double Locking*5

      • The double locking function also prevents the doors from being opened through the operation of the inside door knobs. Thus, the doors cannot be opened from either inside or outside of the vehicle.

      • Pressing the lock button on the electrical key transmitter sub-assembly*1 or door control transmitter sub-assembly*2 once and then pressing it again within 5 seconds activates the double locking function. However, as an emergency unlocking maneuver, only the driver door can be unlocked with a mechanical key.

      Note

      Never activate the double locking system when there are people in the vehicle because the doors cannot be opened from the inside of the vehicle. If the doors have been locked by accident, press the unlock button of the electrical key transmitter sub-assembly*1 or door control transmitter sub-assembly*2.
      Customization The on or off setting of some functions and settings can be performed using the Global TechStream (GTS). In addition, some functions are not available depending on specification. For details, refer to the Repair Manual.

      Tech Tips

      *1: Models with entry and start system

      *2: Models without entry and start system

      *3: Models for Korea

      *4: Available through customization in some countries.

      *5: Models with double locking function