SHIFT AND SELECT ACTUATOR INSPECTION

PROCEDURE

  1. INSPECT SHIFT AND SELECT ACTUATOR ASSEMBLY

    1. Select motor side:

      1. C303533N01

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Tester Connection

        Resistance

        1 - 2

        0.1 to 100 Ω

        If the resistance is not as specified, replace the shift and select actuator assembly.

    2. Shift motor side:

      1. C303534N01

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Tester Connection

        Resistance

        1 - 2

        0.1 to 100 Ω

        If the resistance is not as specified, replace the shift and select actuator assembly.