LANE DEPARTURE ALERT SWITCH(for LHD) REMOVAL

PROCEDURE

  1. PRECAUTION

    Note:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

    Click hereClick hereClick here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click hereClick hereClick here

  3. REMOVE CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL

  4. REMOVE TELLTALE LIGHT ASSEMBLY (LANE DEPARTURE ALERT SWITCH)

    1. B337767

      Detach the 2 clips and claw.

    2. B337768

      Disconnect the connector to remove the telltale light assembly (lane departure alert switch).