ЗАДНИЙ САЛЬНИК УДЛИНИТЕЛЯ КАРТЕРА КПП СНЯТИЕ


  1. REMOVE PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY


    1. TSAM made:

      Remove the propeller shaft with center bearing assembly Click here.

    2. TMT made:

      Remove the propeller shaft with center bearing assembly Click here.

  2. DRAIN AUTOMATIC TRANSMISSION FLUID


    1. Remove the drain plug, gasket and drain ATF.

    2. Install a new gasket and the drain plug.

      Torque:
      28 N*m  { 285 kgf*cm, 21 ft.*lbf }

  3. REMOVE AUTOMATIC TRANSMISSION EXTENSION HOUSING OIL SEAL

    A01DX9EE01

    1. Using SST, remove the oil seal.

      SST
      09308-00010