COMBINATION SWITCH INSTALLATION

PROCEDURE

1. INSTALL COMBINATION SWITCH ASSEMBLY

   
   

   1. Engage the 4 claws to install the combination switch.

2. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

   Click here

3. INSTALL UPPER CONSOLE PANEL

   Click here

4. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

5. INSTALL DECK FLOOR BOX RH

   Click here

6. INSTALL REAR DECK FLOOR BOX

   Click here

7. INSTALL NO. 2 DECK BOARD

   Click here

8. INSTALL NO. 1 DECK BOARD

   Click here

9. INSTALL DECK BOARD ASSEMBLY

   Click here