REAR LEAF SPRING(for 2WD) DISASSEMBLY

PROCEDURE

1. REMOVE REAR SPRING PIN BUSH (for Single Cab)

   
   

   1. Using a screwdriver, remove the 2 rear spring pin bushes from the rear spring assembly LH.

2. REMOVE REAR LOWER SPRING SHACKLE BUSH

   
   

   1. Using a screwdriver, remove the 2 rear lower spring shackle bushes from the rear spring assembly LH.

3. DISASSEMBLE REAR SPRING ASSEMBLY LH

   

   
   

   1. Secure the rear spring assembly LH in a vise between aluminum plates.

   2. Using a brass bar and hammer, pry open the 4 spring clips of the rear No. 3 spring leaf.

      Note

      Do not damage the leaf spring.

   3. 

      Secure the spring with a vise as shown in the illustration.

   4. Remove the nut and center bolt.

   5. Remove the 2 rear No. 3 spring spacers.

   6. Remove the rear No. 1 spring spacer.

4. REMOVE REAR SPRING SILENCER

   
   

   1. Remove the 4 rear spring silencers from the leaf spring.

5. REMOVE REAR SPRING LEAF BUSH (except Single Cab)

   
   

   1. 

      Using SST and a press, press out the rear spring leaf bush.

      SST

      09631-12090

      09632-36010