REVOLUTION SENSOR INSTALLATION

PROCEDURE

1. INSTALL TRANSMISSION REVOLUTION SENSOR (NOUT)

   1. Apply Toyota Genuine CVT Fluid FE to a new O-ring.

   2. Install the O-ring to the transmission revolution sensor (NOUT).

   3. Install the transmission revolution sensor (NOUT) to the continuously variable transaxle assembly with the bolt.

      5.4 N*m

      55 kgf*cm

      48 in.*lbf

   4. Connect the transmission revolution sensor (NOUT) connector.

2. INSTALL TRANSMISSION REVOLUTION SENSOR (NIN)

   1. Apply Toyota Genuine CVT Fluid FE to a new O-ring.

   2. Install the O-ring to the transmission revolution sensor (NIN).

   3. Install the transmission revolution sensor (NIN) to the continuously variable transaxle assembly with the bolt.

      5.4 N*m

      55 kgf*cm

      48 in.*lbf

   4. Connect the transmission revolution sensor (NIN) connector.

3. INSTALL REAR ENGINE UNDER COVER LH

   Click here

4. CHECK DATA LIST

   (Click here)