BLACK OUT TAPE(for Center Pillar) REMOVAL

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

  • When removing the center pillar stripe, heat the vehicle body surface and center pillar stripe using a heat light.

Standard

Item

Temperature

Vehicle Body

68 to 86°C (104 to 140°F)

Center Pillar Stripe

20 to 30°C (68 to 86°F)
Note:

Do not heat the vehicle body surface or center pillar stripe excessively.

PROCEDURE

  1. REMOVE CENTER PILLAR STRIPE LH

    B221007

    1. Heat the vehicle body surface and center pillar stripe using a heat light.

    2. Pull back an edge of the center pillar stripe and pull it parallel to the vehicle body to remove it.