FRONT SEAT INNER BELT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE FRONT SEAT ASSEMBLY LH

    Tech Tips

    Use the same procedure described for the RH side.


    1. for Manual Seat:

      Remove the front seat assembly LH Click here.

    2. for Power Seat:

      Remove the front seat assembly LH Click here.

  2. REMOVE SEAT SLIDE POSITION SENSOR PROTECTOR (for Driver Side)


    1. for Manual Seat:

      Remove the seat slide position sensor protector Click here.

    2. for Power Seat:

      Remove the seat slide position sensor protector Click here.

  3. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side)


    1. for Manual Seat:


      1. A004P9I

        Disconnect the connector.

      2. Detach the 2 wire harness clamps.

      3. Detach the claw and disconnect the connector.

      4. A004NNW

        Remove the screw.

      5. Detach the 2 clamps to disconnect the wire harness.

      6. A004Q1K

        Remove the nut and front seat inner belt assembly LH.

    2. for Power Seat:


      1. A004QM9

        Disconnect the connector.

      2. Detach the 2 wire harness clamps.

      3. Detach the claw and disconnect the connector.

      4. A004NNW

        Remove the screw.

      5. Detach the 2 clamps to disconnect the wire harness.

      6. A004Q1K

        Remove the nut and front seat inner belt assembly LH.

  4. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side)


    1. for Manual Seat:


      1. A004PCP

        Disconnect the connector.

      2. Detach the 2 wire harness clamps.

      3. Detach the claw and disconnect the connector.

      4. A004QS0

        Remove the screw.

      5. Detach the 2 clamps to disconnect the wire harness.

      6. A004RAD

        Remove the nut and front seat inner belt assembly RH.

    2. for Power Seat:


      1. A004NZU

        Disconnect the connector.

      2. Detach the 2 wire harness clamps.

      3. Detach the claw and disconnect the connector.

      4. A004QS0

        Remove the screw.

      5. Detach the 2 clamps to disconnect the wire harness.

      6. A004RAD

        Remove the nut and front seat inner belt assembly RH.