ELECTRIC PARKING BRAKE SYSTEM, Diagnostic DTC:P0805

DTC Code DTC Name
P0805 Clutch Position Sensor "A" Circuit

DESCRIPTION

DTC No. Detection Item DTC Detection Condition Trouble Area Memory Note
P0805 Clutch Position Sensor "A" Circuit Clutch stroke sensor signal from ECM cannot be received for 0.3 seconds or more

  • ECM

  • CAN communication system

  • Skid control ECU (brake actuator assembly)

 DTC stored An electric parking brake system malfunction is displayed on the multi-information display.

CAUTION / NOTICE / HINT

Note

When replacing the skid control ECU (brake actuator assembly), operate the electric parking brake switch (electric parking brake switch assembly) as the parking brake indicator light blinks (red) when the ignition switch is first turned to ON.

WIRING DIAGRAM

B008LBFE04
*1 CAN Communication Line
*2 Skid Control ECU (Brake Actuator Assembly)

PROCEDURE


  1. CHECK DTC


    1. Turn the ignition switch off.

    2. Connect the GTS to the DLC3.

    3. Turn the ignition switch to ON.

    4. Turn the GTS on.

    5. Check for DTC.

      Click here


      Chassis > ABS/VSC/TRC/EPB > Trouble Codes
      Result
      Result Proceed to
      DTC P0805 and a CAN DTC are output at the same time A
      DTC P0805 is output and the MIL is illuminated B
      Only DTC P0805 is output (for LHD) C
      Only DTC P0805 is output (for RHD) D
      DTCs are not output E

    A

    GO TO CAN COMMUNICATION SYSTEM Click here

    B

    GO TO SFI SYSTEM Click here

    C

    REPLACE SKID CONTROL ECU (BRAKE ACTUATOR ASSEMBLY) Click here

    D

    REPLACE SKID CONTROL ECU (BRAKE ACTUATOR ASSEMBLY) Click here

    E

    USE SIMULATION METHOD TO CHECK Click here