SLIDING ROOF SYSTEM


  1. OUTLINE


    1. The sliding roof system uses a glass panel to perform the tilt up-and-down and open-and-close operations.

    2. The sliding roof control ECU controls the sliding roof system. This ECU uses Hall IC to detect the position of the sliding roof. The sliding roof control ECU and Hall IC are integrated in the sliding roof drive gear sub-assembly.

  2. PRECAUTION


    1. Ignition Switch Expressions


      1. The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

        Expression

        Ignition Switch

        (Position)

        Engine Switch

        (Condition)
        Ignition Switch off LOCK Off (LOCK)
        Ignition Switch ACC ACC On (ACC)
        Ignition Switch ON ON On (IG)
        Engine Start START On (Start)

    2. Door Control Receiver Expressions


      1. The type of door control receiver used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.

        Vehicle Specification Part Name in Manual Actual Part Name
        Models with Smart Entry and Start System Door Control Receiver

        • Electrical Key and Tire Pressure Monitoring System Receiver Assembly*1

        • Smart Door Control Receiver*2
        Models without Smart Entry and Start System

        • Door Control and Tire Pressure Monitoring System Receiver Assembly*1

        • Door Control Receiver*2

        *1: Models with tire pressure warning system

        *2: Models without tire pressure warning system