CAMSHAFT POSITION SENSOR REMOVAL


  1. REMOVE FRONT SEAT ASSEMBLY RH

    Click here

  2. REMOVE FRONT DOOR SCUFF PLATE RH

  3. REMOVE ENGINE SERVICE HOLE SUB COVER SUB-ASSEMBLY


    1. Roll up the carpet, and remove the 5 bolts and engine service hole sub cover sub-assembly.

  4. REMOVE INTAKE AIR CONNECTOR


    1. B007TRD

      Slide the clamp and disconnect the No. 2 PCV hose from the cylinder head cover sub-assembly.

    2. Disconnect the vacuum hose from the intake air connector.

    3. Loosen the 2 hose clamps.

    4. Remove the 2 bolts and intake air connector.

  5. REMOVE CAMSHAFT POSITION SENSOR


    1. B007P02

      for Intake Side:


      1. Disconnect the camshaft position sensor connector.

      2. Remove the bolt and camshaft position sensor.

    2. for Exhaust Side:


      1. Disconnect the camshaft position sensor connector.

      2. B007OUX

        Remove the bolt and camshaft position sensor.